Mobile Forms (CoR) Module Overview - Web
Introduction
The Forms (CoR) Module is an addon that allows your staff to complete a variety of customisable forms via the TransVirtual mobile app.
The forms are managed and edited through the web portal, completed in the mobile app and then stored for review in the web portal.
Default Forms
There are a selection of pre formatted forms available when when you enable this module inculding:
1. Vehicle Prestart
2. Driver Fit For Duty
3. Forklift Prestart
4. Vehicle Service
5. Injury/Incident
6. Damaged Freight
7. Licence/Qualification Check
8. Staff Induction
9. Traffic Accident
10. Training/Meeting Attendance Log
11. Visitor/Contractor Log
Each of these templates can be customised and edited to suit your requirements or you can create your own from scratch.
Sample Form Flow - Driver Fit For Duty
Related Articles
Mobile Forms (CoR) Customisation Options - Web
You can customise a wide range of functionality and logic when creating or editing forms. Form Customisation Trigger Form on: 1. Login to App 2. Leave Depot 3. Return Depot 4. Scan 5. Anytime (manual) Link Form to: 1. User 2. Vehicle 3. ...Mobile (CoR) Forms
Mobile Forms Mobile Forms can be triggered to occur based of an event at specified times or completed manually. Step-by-step guide The process of filling out the forms is the same and simple if triggered because of an event or manually. To start a ...Mobile Device Main Screen
The main screen on the mobile device is the starting point for all scanning and delivery operations. . The main functions on this page are outlined in the following articles; Synchronizing Data Manually (): Enables the syncing of data between the ...Route Optimisation Module
Route Optimisation Module What is it? A paid add on module to the TransVirtual mobile app and web portal. All features are thoroughly integrated into both the TransVirtual mobile app and web portal. Enables a number of functions resulting in more ...Advanced Mobile Equipment
Located under Configuration > General > Global Setup > General tab there is the below setting: Enabling this setting allows for increased equipment monitoring functionality including equipment endorsement on freight arriving at depot, equipment ...