Transport Additional Services
Transport Additional Services
Transvirtual allows users to setup Additional Charges which are extra costs attached to consignments for things like Hand Unloads, Tail Lifts, Out of Area, etc.
To setup additional charge, go to Finance > Configuration and Setup > Additional Services OR Configuration > Lists and Zones > Additional Services.
How to add Additional Service
1. To add an additional service, first go to Transport Additional Service or Additional Service page as shown below.
2. Now, click on Add Additional Service button as shown above, a pop-up to create an additional service type will display as shown below.
3. Now, manually enter the Additional Service Name and then click on Update button as shown above.
Here, we are creating an Out of Area charge.
4. Once created, the newly created additional service will appear on the left, in the list of additional charges as shown below.
5. Now, click on this newly created charge and you will see its relevant details on the right side of the page, as shown below.
The blue question mark icons next to each of the headings are clickable and give you an explanation on what each field is used for/does.
5. On the additional service detail page, you can enable/add/update the details as per your requirement as describe below.
a. Requires Approval: Additional Charge is added to a consignment it must be approved before customer invoices can be finalized. To enable this setting, click on the toggle button in Yes position.
b. Default Customer Rate: In this field manually add the value you wish to charge for this Additional Service. Here we are using $5. You can also charge as a percentage of the consignment base if you don't want to charge as a flat rate and this is done using the Default Customer % of Base Price.
c. If you wish, you can set this Additional Service to charge per freight item rather than per consignment. This may be a good idea for Hand Unloads per pallet (you could instead have the driver enter in the quantity of a Hand Unload charge using the 'Driver to collect Quantity' field-which has the same result). To charge per freight item go to Associated Freight Items sectiona nd select the service item with the help of drop-down button as shown below.
If you wish, driver can manually enter the quantity. To do it, enable the Driver to Collect Quantity toggle by clicking on it in Yes position, which is present on the detail of additional services page, as shown below.
For example, if you add pallets to this charge using this field, the consignment will now have this service added as many times as there are pallets; 1 and 1, 2 and 2, etc.
6. Scroll down to the detail page, at the bottom there is a Data Filter section that allows you to add in logic, which is useful, if you wish to add additional service automatically to a consignment rather than manually via the admin tab of the consignment etc.
Example: If you wish to add an additional charge for Out of Area then you have to specify what areas (suburbs or postcodes etc) you wish to add this charge for.
In this example, when the Receiver postcode is 3000 for a consignment, this Out of Area Additional Service will automatically add the charges to that consignment. You could use Suburb names instead if you wish. So perhaps when the Suburb name is Melbourne then the additional charges will automatically add. There is a lot you can do with this data filter, using the drop-down bar you will see a long list of possibilities.
If you wish to leave this data filter blank, the service will not automatically add and will have to manually entered the charges against a consignment (when required).
If you add a Service and give that service a rate/price using the 'Default Customer Rate' then this rate will only be used as long as there is no rate setup for this charge in the corresponding Customer's rate card. You can also have the ability to edit Additional Services in each Customer's rate card in steps 1 and 4. When doing it this way, you can customize a service to charge differently per service level/zone etc.
Having an Additional Service setup in a rate card means that this price will be used before one setup in the Additional Services page.
Make sure that you created the Additional Service before it will be available in a rate card and then go to cate card page.
Rate cards can be found under Finance > Configuration and Setup > Rate Cards.
7. On rate card page, use expand button and click on Additional services button in step 1 or bottom on the page in step 4 as shown below.
Charging for Equipment
In Transvirtual you can charge for equipment on a consignment by setting up additional services and linking the equipment types to these services to auto-charge based on certain conditions.
You will need to have your Equipment Type List setup in order to charge for equipment. Instructions on how to this can be found here.
1. To charge for equipment, navigate to the additional services page (Finance > Configuration and Setup > Transport Additional Services or Configuration > Lists and zones > Additional Services), the additional service page will display as shown below.
1. To charge for equipment, simply first add an additional service as describe in above paragraph and then click on the applicable service to see the detail of selected additional service as shown above.
Here, we are using Skid as an additional service name.
2. On additional service detail page, you can update the details as describe below.
a. Additional Service Name: Update the Additional Service Name (If needed).
b. Default Customer Rate: Manually add the charge in this field.
c. Additional Service AKA: Scroll-down to the page, add Additional Service AKA field the corresponding AKA name for that equipment type.
To see the AKA name go to equipment type list page (Configuration > Lists and Zones > Equipment Type). You will need to have this AKA field as this is what the system uses to link that particular equipment type to this new Additional Service you have created.
The AKA for Skid is EquipmentType4Count.
3. Scroll down the page and go to Data Filter section and enter logic to ensure that Additional Service auto-adds correctly.
In this example we want to add the Skid Additional Service automatically when the EquipmentType4Count is greater than 0. This means that if any consignment has been created and that has 1 or more skids assigned against it, will be charged for whatever the amount is multiplied by the Customer Default Rate. So, if there are 2 Skids and the Default Rate is $1, then an additional service amount of $2 will be added to this consignment.
Make sure that the AKA name is correct for the equipment type you wants to charge for, and that this is then reflected in the data filter. So, if Skid is EquipmentType4Count you must make sure that this is the logic used in the corresponding Additional Service.
4. Once you finish setting up, when you create the next consignment and add Equipment Count into the equipment counts section, you will notice that an additional service price has been automatically added to the price of the consignment as shown below.
5. This amount (Additional Charge) will vary depending on what you have entered in the default customer rate.
Importing Additional Service Prices
In Transvirtual there is the ability to import Additional Service prices.
To import additional services prices, you will still be required to create the Additional Service manually, as described above, but once created, you have the ability to do an import that nominates pricing unique to each customer rate card/customer for each of your setup Additional Services.
This concept is handy for situations where you might be required to update your pricing for all chargeable items at once - an example might be a yearly price increase or the like.
How to Import Additional Services
1. To begin, you will need to ensure that all applicable Additional Services have been created under the Additional Services page (Finance > Configuration and Setup > Additional Services or Configuration > List and Zones > Additional Services).
Use Add Additional Service button to create more if needed!
2. Once your Additional Services have been created, now go to Finance > Configuration and Setup > Rate Cards, go to Customer Rate Cards, and click on Global Actions button, a pop-up for Rate Global Actions will display as shown below.
3. Now enable the Export Step 1 Additional Service with the help of toggle button and then click on Action button, now you will get a file that looks similar to the below when opened.
Ensure to open the file that is downloaded when you click on Action button.4. The detail of the columns in this file are as described below:
Rate Title: The name of the rate card in your account. Relates to the title listed against the rate card.
Rate Service Title: The Service Level in step 1 of the relevant rate card.
Additional Service: The Additional Service name/type.
Rate Flat Value: The price associated with the Additional Service as a flat $ amount (e.g. every hand unload you do might be a flat $25 charge).
Rate Value Percentage: The price associated with the Additional Service as a % of the base price amount (e.g. Re-Delivery charges may incur a 100% of the base price charge - because you are essentially doing the delivery again etc).
Rate Min Charge: The minimum price associated with the Additional Service as a flat $ amount. Handy if you need to set a 'base' amount for an Additional Service at which point the charge/price for that Additional Service cannot come under. Any Additional Services added with prices lower than the Min Charge will have the price for that Additional Charge increased to the nominated Min Charge amount.
5. From here, simply enter the relevant prices into your file as shown below.
Note: If entering a value into the Rate Value Percentage column, the value must be entered as the decimal equivalent. For example, if you want to enter 20% you need to make the value 0.2, 10% would be 0.1 and so on.6. Once you adjusted the prices, now you are able to import the file to update the prices for the additional services. To do so, navigate again to the Customer Rate Card page, and click on Global Actions button again and here enable the Import Step 1 Additional Service with the help of toggle button and upload the file and then click on Action button as shown below.
When upload the file, ensure you save your file as a .csv if it is not in that format.
There is no requirement to map the file as with other import types in Transvirtual! Doing in the method as above ensures the columns and formatting of the file are correct for importing.7. Once imported, you will see that the prices have been updated as per your file as shown below.
Automating Wait Time/Demurrage Charges
If needed, you can automatically charge for 'Wait Time' based on the time duration. The delivery driver was on-site, either performing a delivery/or a pickup (The process for delivery/pickup is very similar as per describe below).
1. To begin this setting, you will need to be enabled the Ask driver to Confirm Onsite with the help of toggle button in Yes position, as shown below.
1. To begin this setting, you will need to be enabled the Ask driver to Confirm Onsite with the help of toggle button in Yes position, as shown below.
To navigate this setting, go to Configuration > General > Global Setup, scroll down and go to delivery section.
2. This setting can also be found against each device in the device list where you can change the setting against a device to be different to your global default (if required).
3. Here, creates an additional charge (or series of charges) with an appropriate name.
In this example we are suing 'Demurrage Charge (Delivery)'4. Once additional charge created, you need to go to the data filter section located at the bottom of the additional charge detail page. Data filter section helps you to add additional charges automatically to the applicable consignments.
5. To do so, from Step 1 select either of the two below fields depending on whether this is to apply to pickups or deliveries.
In this example, the top option for Delivery will be chosen.
6. First Select Field and click on Next button to select the Logic and then click on Next button to Select the Value, Click Next and proceed to Step 2.
In this example we choose Total minutes on Site (Delivery) as field, Logic will be Greater Than and then finally select the Value i.e., 2.
7. Once you select the value, click on the Add Rule Button, the data filter will then populate with the logic you have added as shown above.
8. In the above example, the additional charge will be added automatically to any consignments when the driver has been at the delivery location for longer than 2 minutes.
Make sure to set a price against this Additional Charge!
Things to Note for this:
1. The time charged will be the number of minutes between the driver confirming onsite and delivery completion minus the time value specified in your Additional Service data filter.
For example: If your data filter starts applying after 2 minutes onsite and the driver is onsite for 10 minutes in total (between arrival and delivery completion), the charge would be for 8 minutes if using a setup like the above example.
2. The driver does not have to choose this additional charge on their device, it automatically applies to the relevant consignment. It will auto-add as expected if the driver is prompted to confirm they have arrived on-site and does so accordingly.
2. The driver does not have to choose this additional charge on their device, it automatically applies to the relevant consignment. It will auto-add as expected if the driver is prompted to confirm they have arrived on-site and does so accordingly.
3. For this to work properly, the driver must be at the receiver location. Transvirtual uses GPS information with this setup, to automatically add wait time. This process will not work if the driver confirms being onsite but isn't actually at the receiver location.
4. It is possible to set the Additional Charge to apply in increments, like the below example:
5. You can add a time in brackets after the additional service name as shown below. If you do, the price you list will be what the system charges for that period of time.
6. As shown above, in every 5 minutes increment that the driver is on-site will incur a $1.50 charge.
For example: If the driver has been on-site for 10 minutes, then the charge qty would be 2 and the price would be 2 x $1.50 = $3.
7. For this to work as expected the formatting MUST be like (5 Mins) or (10 Mins) or (15 Mins) etc.
7. For this to work as expected the formatting MUST be like (5 Mins) or (10 Mins) or (15 Mins) etc.
8. If you want to set these charges up for both pickup and deliveries you MUST have separate Additional Charges, like below as an example.
9. Your data filter for the delivery charge could look like the below (you need to use the delivery option).
10. Your data filter for the pickup could look like the below (you need to use the pickup option):
11. You CAN'T have one Additional Charge with a data filter like the below:
12. The reason for this is that there may be times where a driver is onsite for more than 30 minutes for the delivery but not for the pickup component - if this were to happen then the system would calculate the charge amounts for both components and possibly provide a negative value (if the negative pickup amount 'out-weighed' the positive delivery amount).
Instead, each Additional Demurrage Charge MUST be separated by the type of consignment it would apply to - pickup or delivery.
Instead, each Additional Demurrage Charge MUST be separated by the type of consignment it would apply to - pickup or delivery.
Related Articles
Additional Services
Transvirtual allows users to setup Additional Charges which are extra costs attached to consignments for things like Hand Unloads, Tail Lifts, Out of Area, etc. To setup additional charge, go to Finance > Configuration and Setup > Transport ...Transport Additional Service Approvals
Transport Additional Service Approvals Once an Additional Service has been added to a consignment it may need to be approved before customer invoices can be finalized. The best way to approve Additional Services is using the Additional Service ...Additional Services Export
Additional Services EDI Export In TransVirtual there is the ability to create Additional Service EDI (Electronic Data Interchange) Export Rules that can send out information from TransVirtual to a location, this can be done using FTP, Email, etc, ...Transport Price Reviews
Transport Price Reviews In TransVirtual there are a series of pages that help you monitor your Finances. These pages allow you to monitor consignments that have not been invoiced, approve or reject the additional services and test out new ...Transport Quotes
Quotes If you need to create a quote for a new consignment that may go ahead in future and record for your reference, you can create quotes. To Create a Quote 1. To create/add a quote, go to either go to Finance > Operational Tasks > Transport Quotes ...