Urovo DT50X Device Setup

 

Follow the below instructions to configure you Urovo DT50X device to work with the TransVirtual mobile app for scanning.

 

Step 1

Enter the devices settings menu

 

 

 

Step 2

Scroll down and tap on the “Scanner Settings” menu item.

Step 3

Scroll down and tap on the “Output Mode” menu item.

 

 

Step 4

At the top, tap on the “Output Mode” menu item where is currently says “Keystroke Output” underneath.

Step 5

This will bring up a window with three options, tap on the circle next to “Intent Output”.

 

 

Step 6 (Optional)

You can then scroll down and an option appears to Vibrate when the scan is successful. Tap on the slider next to “Vibrate” to enable.

 

Step 7

All configuration is complete, back out of the settings menu, install the TransVirtual app and your device will be ready to use.