ScanSku C66
ScanSku C66 Device Configuration
If you have a C66 ScanSku device running on Android 11 or higher, you may run into issues when following standard configuration.
This article will direct you in following the new configuration process.
Step 1.
Find the scanning application on your main page:
Step 2.
Enable the scanner:
Step 3.
Change the process mode to be 'BroadcastReceiver':
Step 4.
Enter in the required code to the Broadcast Name and set the Key to be data:
android.intent.action.scanner.RFID
Step 5.
Check and test your scanning on the device.