Point Mobile Device Configuration
Point Mobile Devices Documentation
PM80
Using a PM80 scanning device to scan items into TransVirtual, use this step by step guide to configure the device to make scanning simpler.
1. Select the app drawer on your device
2. Select Settings
3. Select ScanSetting as below
4. Touch the button on the top right to "On"
5. This will enable a new set of options, Tap on Basic
6. Tap on Enable Continuous scan to enable it
7. Under the Wedge Mode menu tap on Result type and select the result type Intent Broadcast
8. Also under the Wedge Mode menu tap Terminator and select the LF option
Related Articles
Mobile Device Troubleshooting
Mobile Device Troubleshooting If you are having trouble using the TransVirtual mobile app on a device, the below checklist may assist you. Ensure that your device has a network connection. This could be either Wi-Fi or mobile data (3G, 4G phone ...Devices
Devices Considerations When selecting a device it is always important to ensure it is durable to withstand general wear and tear of the environment it will be operating in. Ensure the screen size is adequate to your needs Ensure the camera quality is ...Advanced Mobile Equipment
Located under Configuration > General > Global Setup > General tab there is the below setting: Enabling this setting allows for increased equipment monitoring functionality including equipment endorsement on freight arriving at depot, equipment ...Mobile Device Main Screen
The main screen on the mobile device is the starting point for all scanning and delivery operations. . The main functions on this page are outlined in the following articles; Synchronizing Data Manually (): Enables the syncing of data between the ...Device List
Overview This article will describe how to access the device list and the features available. Accessing the device list In the navigation menu go to Home > Devices and Locations > Device List This will present a list of devices like the following; ...