Chainway Device Configuration

Chainway Device Configuration

Chainway Device Configuration

To configure a Chainway device for scanning onto the load page of TransVirtual, you will need to ensure that you follow the below steps and ensure version 1.242 of TransVirtual is on your device.

Step 1

Enter the barcode application on your device that will be called "keyboardemulator".

Step 2

Go to "App Setting" then "Process Mode" and ensure "BroadcastReceiver" is selected.

Step 3

Underneath "Barcode" ensure the "Broadcast name" is  android.intent.action.scanner.RFID

Step 4

Next to "Key" ensure data is in the required field.

    • Related Articles

    • Mobile Device Troubleshooting

      Mobile Device Troubleshooting If you are having trouble using the TransVirtual mobile app on a device, the below checklist may assist you. Ensure that your device has a network connection. This could be either Wi-Fi or mobile data (3G, 4G phone ...

    • CipherLab Device Configuration

      CipherLab Devices - Configuration and Setup RS30 1. Go into apps and find ReaderConfig application. 2. Go into Data Output 3. Go into Keyboard Emulation and set it to none

    • Point Mobile Device Configuration

      Point Mobile Devices Documentation PM80 Using a PM80 scanning device to scan items into TransVirtual, use this step by step guide to configure the device to make scanning simpler. 1. Select the app drawer on your device 2. Select Settings 3. Select ...

    • Device List

      Overview This article will describe how to access the device list and the features available. Accessing the device list In the navigation menu go to Home > Devices and Locations > Device List This will present a list of devices like the following; ...

    • Scan SKU Device Setup

      Scan SKU Device Setup  The default setup of Scan SKU devices doesn't allow seamless scanning to the load screen of the TransVirtual app. The following configuration will need to be updated. 1. Go to the app drawer on our device and select the ...