Auto Release
Auto Release
The auto release function automatically enables the release of all closed loads at the specified day and time.
How to Enable
1. To enable auto-release function, go to Configuration > General > Global Setup, click on the Planning Module tab, the auto release page will display as shown below.
2. Click on the Enable auto release load toggle button to "Yes"
3. Now, set the day and time to release the load.
a. Double-click on the blank space right next to the "Release loads due to depart", select the day from the drop-down, and click on the "Save" button to save the changes.
b. Repeat the same steps above to set the time for the "Time of day to release the load" section: